Samarium Cobalt Rectangular Magnets

Samarium Cobalt Rectangular Magnets
Product Introduction:
Samarium Cobalt (SmCo) rectangular blocks maintain stable magnetic performance in environments where NdFeB alloys demagnetize or oxidize. Manufactured under an ISO 9001:2015 and IATF 16949 certified quality management system, these components utilize SmCo5 (1:5 series) and Sm2Co17 (2:17 series) alloys to deliver high thermal stability up to 350°C. Over 60% cobalt content provides intrinsic corrosion resistance, eliminating the need for protective plating in standard atmospheric conditions.
Send Inquiry
Description
Technical Parameters

Samarium Cobalt (SmCo) rectangular blocks maintain stable magnetic performance in environments where NdFeB alloys demagnetize or oxidize. Manufactured under an ISO 9001:2015 and IATF 16949 certified quality management system, these components utilize SmCo5 (1:5 series) and Sm2Co17 (2:17 series) alloys to deliver high thermal stability up to 350°C. Over 60% cobalt content provides intrinsic corrosion resistance, eliminating the need for protective plating in standard atmospheric conditions.

 

Technical Specifications

 

Magnetic Properties

Material Grade

Material

Remanence (Br)

Coercivity (Hcb)

Intrinsic Coercivity (Hcj)

Max. Energy Product ((BH)max)

Max. Operating Temperature

YXG-28

Sm2Co17

10.5 - 11.2 kGs / 1.05 - 1.12 T

9.2 - 10.5 kOe / 733 - 836 kA/m

15.0 kOe / 1194 kA/m

26 - 30 MGOe / 207 - 239 kJ/m3

350°C

YXG-30

Sm2Co17

11.0 - 11.6 kGs / 1.10 - 1.16 T

9.8 - 11.0 kOe / 780 - 875 kA/m

18.0 kOe / 1432 kA/m

28 - 32 MGOe / 223 - 255 kJ/m3

350°C

YXG-32

Sm2Co17

11.3 - 11.8 kGs / 1.13 - 1.18 T

10.0 - 11.2 kOe / 796 - 891 kA/m

20.0 kOe / 1592 kA/m

30 - 34 MGOe / 239 - 271 kJ/m3

350°C

YXG-34

Sm2Co17

11.6 - 12.2 kGs / 1.16 - 1.22 T

10.2 - 11.5 kOe / 812 - 915 kA/m

22.0 kOe / 1751 kA/m

32 - 36 MGOe / 255 - 287 kJ/m3

350°C

YXG-24H

SmCo5

9.0 - 9.8 kGs / 0.90 - 0.98 T

8.5 - 9.5 kOe / 676 - 756 kA/m

20.0 kOe / 1592 kA/m

20 - 24 MGOe / 159 - 191 kJ/m3

250°C

 

Physical & Mechanical Properties

Parameter

Specification

Density

8.2 - 8.4 g/cm3

Vickers Hardness

500 - 600 HV

Electrical Resistivity

~0.5 - 0.8 x 10^-4 Ohm*cm

Thermal Expansion Coefficient, Parallel (20°C - 200°C)

10.0 x 10^-6 /°C

Thermal Expansion Coefficient, Perpendicular (20°C - 200°C)

5.2 x 10^-6 /°C

Standard Dimensional Tolerance

+/-0.1 mm

Precision Ground Tolerance

Up to +/-0.02 mm

 

Magnetization & Size

Parameter

Specification

Magnet Shape

Rectangular blocks, bars, and tiles

Maximum Standard Size

Up to 100 mm x 80 mm x 50 mm

Magnetization Direction

Through thickness, length, or width

Magnetization Pattern

Single-pole or multi-pole configurations

Surface Finish

Uncoated, Ni-Cu-Ni plating, Epoxy, or Parylene coating

Material Series

SmCo5 (1:5) and Sm2Co17 (2:17)

 

Key Features

 

Thermal Stability: Reversible temperature coefficient of Br at -0.035%/°C (Sm2Co17) prevents irreversible flux loss during high-temperature cycles.


Coercivity (Hcj): High resistance to demagnetization under opposing magnetic fields or thermal spikes.


Anisotropic Structure: Field-aligned during powder pressing to lock in a single preferential magnetization axis.

 

Applications

Aerospace & Defense:

Gyroscopes, traveling-wave tubes, actuators, and telemetry sensors.

Oil & Gas:

MWD systems and directional drilling tools operating above 200°C.

Motors & Generators:

High-speed brushless motors requiring stable air-gap flux under thermal load.

Medical Equipment:

NMR instrumentation and therapeutic beam-focusing assemblies.

 

Customization Options

 

Dimensions: Blocks, bars, and tiles up to 100 mm x 80 mm x 50 mm.


Magnetization: Through thickness, length, width, or multi-pole configurations.


Surface Finishes: Uncoated, Ni-Cu-Ni plating, Epoxy, or Parylene coating.

 

Manufacturing & Quality Control

 

Production Workflow
• Melting: Vacuum induction melting of raw elements.
• Milling: Closed-loop nitrogen jet milling (3 - 5 um particle size).
• Pressing: Isostatic or die compaction under a 20+ kOe aligning field.
• Sintering: Solid-state sintering followed by phase-homogenization heat treatment.
• Machining: Fluid-cooled diamond-wheel slicing and surface grinding.


Quality Inspection & Compliance
• Frameworks: ISO 9001:2015 and IATF 16949 certified.
• Magnetic Testing: 100% sample lot testing via Hysteresis Graph systems up to 300°C.
• Dimensional Verification: 3D Optical Comparators and CMM.
• Corrosion Testing: ASTM B117 salt spray chambers.

 

Packaging & Documentation

Packaging:

Non-magnetic polyethylene foam dividers inside double-walled cartons with perimeter magnetic shielding to comply with IATA transport limits.

Documentation per Lot:

Certificate of Analysis (COA) for magnetic properties, Material Safety Data Sheet (MSDS), and dimensional inspection reports.

 

FAQ

 

Q: What is the maximum continuous working temperature?

A: Sm2Co17 operates up to 350°C; SmCo5 operates up to 250°C. Exceeding these limits causes permanent structural demagnetization.

Q: Why is specialized machining required?

A: SmCo is a hard, brittle intermetallic compound (500 - 600 HV). Conventional metal-cutting tools cannot machine it; all sizing requires diamond abrasive grinding.

Q: What is the standard production lead time?

A: Custom rectangular production runs require 3 to 4 weeks, including sintering, diamond machining, and batch magnetic testing.

 

Hot Tags: samarium cobalt rectangular magnets, China samarium cobalt rectangular magnets manufacturers, suppliers, factory, FPC Magnetic Carriers, Halbach Array Magnets, Samarium Cobalt Disc Magnets, samarium cobalt magnets, Samarium Cobalt Ring Magnets, Square Samarium Cobalt Magnet

Send Inquiry
Your Needs, We Make.
Golds-Magnets, Professional Magnets Solution Supplier!
contact us