Magnets need mold manufacturing, common specifications have ready-made molds, if you need a special shape, to inform in advance, because the mold takes time. Magnet is a hard sintered product, economical and durable. The residual flux density is based on size ratio and shape. When designing, it is necessary to know the size proportion, magnetic direction and individual use information.
The material of the shaped magnet is relatively brittle, and the processing procedure is also more complex. Mainly used in various machines, motors, wind turbines and other industrial uses. In particular, the shaped electromechanical magnetic tile is a kind of shaped magnet that is more common in daily production.
Advantages of shaped magnet: The product is cost-effective and has good mechanical properties. It has been widely used in modern industry and electronic technology.
Special-shaped magnets need to be processed in strict accordance with the size standards designed in drawings, so accurate measurement inspection is required after processing. The image measuring instrument can meet the measurement needs of various sizes of special-shaped magnets.
In addition to the general length and width dimensions, the image measuring instrument can also measure such as the flatness of the magnet, the multi-segment curvature of the shaped magnet, the diameter radius of the magnet, the R-angle of the shaped magnet, the height of the magnet, the aperture of the shaped magnet, the concentricity of the ring magnet, etc. Multi-angle and multi-azimuth are sufficient to meet your measurement requirements for various sizes of shaped magnets.
Of course, magnet measurement is more than only shaped magnet measurement, such as connector strong magnet measurement, circular magnet measurement, square magnetic measurement, punching magnet measurement, motor magnet measurement.
